Microscopy Camera Axiocam 705 pol R2 (D)

Description

Microscopy Camera Axiocam 705 pol R2 D High Performance microscopy camera incl. driver software 64 bit USB 3.0 PCIe x1 interface, USB 3.0 cable 3 m and protection glass wideband coated Sensor Type: SONY IMX250 MZ Exmor CMOS, SONY Pregius Global Shutter Monochrome with 2x2 pixel specific polarization filter mask 90, 45, 135, 0 Number of Pixels: 2464 H x 2056 V = 5.07 Mega pixel Pixel Size: 3.45 mum x 3.45 mum Chip Size: 8.5 mm x 7.1 mm, equivalent to 2/3 diagonal 11.1 mm Spectral Range: With protection glass approx. 350 nm to 1000 nm Full Well Capacity: Approx. 11,000 e at gain 1x typ. Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor 1x1 2464 x 2056 1x1 Basic Resolution 816 x 684 3x3 480 x 410 5x5 at 2x2 combined analog and digital binning for further increase of sensitivity Live Frame Rates: 1 ms exposure, default setting, simplified color coding H x V Frame Rate fps 2464 x 2056 25 1ms exposure time, ROI 1920 x 1080, standard color coding H x V Frame Rate fps 1920 x 1080 5,5 Read Noise Full Well Capacity Dynamic Range at gain 2.20 e 1x 11,000 e 1:5000 1.74 e 2x 5,000 e 1:3100 1.48 e 4x 2,700 e 1:1800 1.29 e 8x 1,300 e 1:1300 1.15 e 16x 690 e 1: 600 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, adjustable over or under-exposure mode, optional measurement on defined target area spot- meter Readout of Sensor Sub Regions ROI : Adjustable Digitization: 8, 12, 14 bit / pixel 8 out of 14 bit or compression mode Dark Current: 0.5 e/p/s @ 18 C sensor temperature Cooling: Stabilized temperature to 18 C for ambient temperatures from 18 C to 30 C Exposure Time Range: 0.1ms to 60 s Hardware Trigger: Trigger-In for exposure time control, Trigger-Out for exposure time, readout time and trigger ready status further accessories required Status-LED for Camera: Color coded operation status, dimmable Camera Interface: USB 3.0 Optional operation withUSB 2.0 at reduced frame rate Optical Interface: C-Mount Thread Depth for Objectives: max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 5,1 cm 2.3x 3.2 x 2,0 / 580 g Housing: blue anodized aluminum, with cooling fins on top, 1/4 photo thread for tripod mount Registration: CE Power Supply: Provided by USB 3.0 und USB 2.0, max. 7 W consumption Environmental Conditions: 5 C to 35 C, max. 80 % relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Supported Application Software: ZEN 3.6 blue edition, Hotfix 3.6.6 or higher, ZEN core 3.5 Hotfix 3.5.4 or higher The required application software is available via the ZEISS Download Center.