Microscopy Camera Axiocam 820 mono

Description

Microscopy Camera Axiocam 820 mono High performance microscopy monochrome camera incl. driver software 64bit, Interface card USB 3.1 Gen2 PCIe x4, dual USB 3.0 cable 3 m Sensor Type: SONY IMX541 CMOS, monochrome, Global Shutter Backside Illuminated Number of Pixels: 4512 H x 4512 V = 20.3 Mega Pixels Pixel Size: 2.74 mum x 2.74 mum Chip Size: 12.4 mm x 12.4 mm, square field of view , equivalent to 1.1 17,4 mm diagonal Spectral Range: With protection glass. 350 nm to 1000 nm Peak QE: 86 % @ 520 nm typ. , backside illuminated design Full Well Capacity: Approx. 10,000 e at gain 1x typ. Adjustable Signal Amplification: 1x, 2x, 4x, 8x, 16x Selectable Resolution: H x V Binning Factor digital 4512 x 4512 1x1 basic pixelcount 2256 x 2256 2x2 1504 x 1504 3x3 1128 x 1128 4x4 902 x 902 5x5 at 2x2 combined analog and digital binning for further increase of sensitivity H x V Subsampling Factor full field of view 4512 x 4512 1x1 2256 x 2256 2x2 Live frame rates depending on hardware and software configuration : Exp. Time 1ms H x V Frame Rate 4512 x 4512 >20 fps High Res mode, high CPU load 2256 x 2256 >30 fps default: Fast Mode, reduced CPU load Frame rates for time series recording 1 ms exposure, further depending on Sensor ROI, hardware and software configuration H x V ROI FrameRate fps 4512 x 4512 28 2256 x 2256 75 2x2 subsampling; full field of view 2248 x 1504 82 1920 x 1080 110 1024 x 1024 115 512x x 512 207 1920 x 256 346 1920 x 128 447 Read Noise Full Well Capacity Dynamic Range at gain 2.3 e 1x 10,000 e 1:4440 1.8 e 2x 5,500 e 1:2720 1.6 e 4x 2,500 e 1:1540 1.5 e 8x 1,250 e 1: 850 1.3 e 16x 625 e 1: 470 HDR Mode: 1,6 e 40,000 e 1:25,000 Software Supported Camera Operation: Exposure time adjustment with continuous, automatic or manual mode, Adjustable over or under-exposure mode, Optional measurement on defined target area spot-meter , Image sharpening, Dark current compensation, Single pixel noise correction Readout of Sensor Sub Regions ROI : Adjustable Digitization: 8, 12, 14 bit / pixel 8 out of 14 bit or compression mode Dark Current: 0.1 e/p/s @ 25 C sensor temperature Cooling: Stabilized temperature to 25 C mounted on microscope, free air flow, ambient temp. 22 C Exposure Time Range: 0.1 ms to 60 s Hardware Trigger: Trigger-In for exposure timecontrol Trigger-Out for exposure time Readout time and trigger ready status further accessories required Status-LED for Camera: Color coded operation status, dimmable Camera Interface: Dual USB 3.0 SuperSpeed, 2 x 5 Gbit/s for data and power supply optional single USB 3.0 at lower framerates and without cooling OpticalInterface: C-Mount Thread Depth for Objectives: Max. 5 mm Size / Weight: Approx. 10.8 cm x 7.8 cm x 6.1 cm 4.2 x 3.1 x 2.4 / 620 g Housing: Blue anodized aluminum, with cooling fins on top 1/4 photo thread for tripod mount Registration: CE Power Supply: Provided by Dual USB 3.0, 5V, max. 7 W power consumption Environmental Conditions: 5 C to 35 C, max. 80 % relative air humidity, not condensing, free air circulation required Supported Operating Systems: for ZEN: Windows 10 x64 Enterprise Supported Application Software: ZEN 3.6 blue edition or higher, ZEN 3.5 core or higher The required application software is provided via ZEISS Microscopy Installer or ZEISS Download Center.